User Manual of Network Fisheye Camera
53
Figure 5-31 Enable Motion Detection
(3)Click . Click and drag the mouse on the live video image to draw a
motion detection area.
Note: You can draw up to 8 motion detection areas on the same image.
(4)Click to finish drawing.
Note: You can click to clear all of the areas.
(5)(Optional) Move the slider to set the sensitivity of
the detection.
2. Set the Arming Schedule for Motion Detection.
Steps:
Figure 5-32 Arming Time
(1)Click to edit the arming schedule. The Figure 5-28 shows the
To Next Page
Loading...
