© Hikvision
Auto
In Auto mode, the camera retains color balance automatically according to the current color
temperature.
Manual White Balance:
In MWB mode, you can adjust the color temperature manually to meet your own demand as
shown in Figure 6-32.
Figure 6-32 Manual White Balance
Outdoor
You can select this mode when the speed dome is installed in outdoor environment.
Indoor
You can select this mode when the speed dome is installed in indoor environment.
Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the speed dome.
Sodium Lamp
You can select this mode when there are sodium lamps installed near the speed dome.
ATW
In ATW mode, white balance is continuously being adjusted in real-time according to the color
temperature of the scene illumination.
Image Enhancement
Note:
The functions vary depending on different camera models.
3D Digital Noise Reduction
You can set Digital Noise Reduction function to Normal and adjust the Noise Reduction Level as
shown in Figure 6-33. The level ranges from 0 to 100.
Figure 6-33 3D Digital Noise Reduction
If you are a professional technician, you can set it to Expert Mode then adjust Space DNR Level
and Time DNR Level. The level ranges from 0 to 100.
Figure 6-34 Expert Mode
Defog Mode
You can set the Defog Mode to Auto, ON or OFF as you need.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
