HIKVISION DS-2DE4225W-DE - Video Adjustment

© Hikvision
Figure 6-35 Defog Mode
 EIS (Electronic Image Stabilization)
You can set the EIS to ON or OFF as you need.
Figure 6-36 Electronic Image Stabilization
 OIS (Optical Image Stabilization)
You can set the OIS to NORMAL, EXPERT, or OFF as you need.
Note:
The function is only available for certain camera models.
Figure 6-37 Optical Image Stabilization
Video Adjustment
Note:
The function is only available for certain camera models.
 Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the
mirror. The flip direction can be set to OFF or CENTER.
 Video Standard
You can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video system
in your country.
 Capture Mode
You can disable this function or select the capture mode from the list.
Other
 Lens Initialization
The lens operates the movements for initialization when you enable Lens Initialization.
 Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be selected
from the list.
 Local Output
You can select the output mode to ON or OFF.
Note:
The functions vary depending on different camera models.