HIKVISION DS-2SE7C43C432MW-AEB

Firmware Directory Locate the directory which the upgrade le belongs to.
3.
Click Browse to select the upgrade le.
4.
Click Upgrade.
11.8 Undervoltage Alarm
It is used to monitor the device voltage and warns you when the voltage is alarmingly low.
When the device voltage is too low, a sign appears in live view image. Then, you are
recommended to opmize the power supply, so as to avoid device abnormal.
The
funcon is on by default.
11.9 View Open Source
Soware License
Go to Conguraon → System → System Sengs → About Device , and click View Licenses.
11.10 Set Live View
Connecon
It controls the remote live view connecon amount.
Live view
connecon controls the maximun live view that can be streamed at the same me.
Enter Conguraon → System → Maintenance → System Service to set the upper limit of the
remote
connecon number.
11.11 Time and Date
You can congure me and date of the device by conguring me zone, me synchronizaon and
Daylight Saving Time (DST).
11.11.1 Synchronize Time Manually
Steps
1.
Go to Conguraon → System → System Sengs → Time Sengs .
2.
Select Time Zone.
3.
Click Manual Time Sync..
4.
Choose one
me synchronizaon method.
-
Select Set Time, and manually input or select date and
me from the pop-up calendar.
-
Check Sync. with computer
me to synchronize the me of the device with that of the local
PC.
5.
Click Save.
TandemVu PTZ Camera User Manual
88