HIKVISION DS-2XC6745G0-IZHS

Note
●
If the device cannot focus with auxiliary focus, you can use Lens Inializaon , then use auxiliary
focus again to make the image clear.
●
If auxiliary focus cannot help the device focus clearly, you can use manual focus.
3.1.9 Lens Inializaon
Lens inializaon is used on the device equipped with motorized lens. The funcon can reset lens
when long me zoom or focus results in blurred image. This funcon varies according to dierent
models.
Click to operate lens inializaon.
3.1.10 Lens Parameters Adjustment
PTZ is an abbreviaon for pan, lt, and zoom. It means the movement opons of the device. In live
view interface, you can click the direcon control buons to control the pan/lt movement, and
click the zoom/focus/iris buons to realize lens control.
Note
●
Supported PTZ funcons may vary according to dierent camera models.
●
For the devices which support lens movements only, the direcon buons are invalid.
Direcon Control
Click and hold the direcon buon to pan/lt the device.
Zoom
●
Click , and the lens zooms in.
●
Click , and the lens zooms out.
Focus
●
Click , then the lens focuses near and the nearby object gets clear.
●
Click
, then the lens focuses far and the distant object gets clear.
Network Camera User Manual
8