HIKVISION DS-2XC6745G0-IZHS - Set Unattended Baggage Detection

Figure 10-4 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
7.
Click Save.
10.3.5 Set
Unaended Baggage Detecon
It is used to detect the objects le over in the predened region. Linkage methods can be triggered
aer the object is le and stays in the region for a set me period.
Before You Start
●
Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.
●
For the device supporng HEOP, go to VCA to import and enable Smart Event.
Steps
1.
Go to VCA → Set
Applicaon → Smart Event → Unaended Baggage Detecon .
2.
Check Enable.
3.
Click Add to add a rule and set a detecon area.
1) Draw a
detecon area. Click , click on the live view to specify the vertexes and draw the
boundaries of the detecon area, and right click to complete drawing.
2) Set the minimum size and the maximum size for the target to improve
detecon accuracy.
Only targets whose size are between the maximum size and the minimum size trigger the
detecon. Click and , then drag the mouse in the live view to draw the minimum and
maximum target size.
Network Camera User Manual
82