HIKVISION DS-2XC6745G0-IZHS - Chapter 7 Arming Schedule and Alarm Linkage; Set Arming Schedule; Linkage Method Settings

Chapter 7 Arming Schedule and Alarm Linkage
Arming schedule is a customized me period in which the device performs certain tasks. Alarm
linkage is the response to the detected certain incident or target during the scheduled
me.
7.1 Set Arming Schedule
Set the valid
me of the device tasks.
Steps
1.
Oponal: Click Arming Schedule and Linkage Method in the related event interface.
2.
Click Edit behind Arming Schedule.
3.
Click Draw, and drag the
me bar to draw desired valid me.
Note
●
Each cell represents 30 minutes.
●
Move the mouse over the drawn me period to see specic me periods and ne-tune the
start me and end me.
●
Up to 8 periods can be
congured for one day.
4.
Click Erase, and drag the me bar to clear selected valid me.
5.
Click OK to save the sengs.
Figure 7-1 Set Arming Schedule
7.2 Linkage Method
Sengs
You can enable the linkage funcons when an event or alarm occurs.
Network Camera User Manual
43