WiFi Router • User Guide
31
Method 2: Set the router to universal relay mode
Procedures:
Launch a web browser on a device connected to the router and visit
http://hikvisionwifi.local to log in to the web UI of the router.
If you use the router for the first time or have reset the router, proceed with the following steps. If
you have already configured the router, skip Step 2.
Set Connection Type to Dynamic IP Address, and click Save. You will be directed to the
Status page.
If you are using a wireless device for configuration and are not directed to the Status page
automatically, ensure that your wireless device is still connected to the WiFi network of the router.
Internet connection status
To Next Page
Loading...
