HIKVISION DS-7100HGHI-K1/R Series

Steps
1. Click Linkage
Acon.
Figure 5-14 Linkage Acons
2. Set normal linkage acons, trigger alarm output, trigger recording channel, etc.
Full Screen Monitoring
The local monitor will display the alarming channel image in full screen when an alarm is
triggered. It requires to select the alarming channel(s) in Trigger Channel.
Audible Warning
It will trigger an audible beep when an alarm is triggered.
Nofy Surveillance Center
The device will send an excepon or alarm signal to the remote client soware when an
alarm is triggered.
Send Email
It will send an email with alarm
informaon when an alarm is triggered.
PTZ Linkage
It will trigger PTZ acons (e.g., call preset/patrol/paern) when smart events occur.
3. Click Apply.
Digital Video Recorder User Manual
30