HIKVISION DS-7100HGHI-K1/R Series - Page 52

Select the live view window division.
Dwell Time
The me to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the
me to show alarm event image.
Enable Audio Output
Turn on/o audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3. Click Apply.
Congure
Live View Layout
Steps
1. Go to Conguraon → System → Live View → View .
2. Select Video Output Interface to congure.
3. Click to select a window and click a camera No. in the camera list you would like to display.
means no camera is displayed on the window.
4. You can
Icon
Descripon
Start live view of all the cameras in order.
Stop live view of all the cameras.
5. Click Apply.
Congure
Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
me from a web browser or CMS (Client Management System) soware, in order to decrease the
bandwidth requirement without aecng the image quality.
Steps
1. Go to Conguraon → System → Live View → General .
2. Set Video Output Interface as Channel-Zero.
3. Go to
Conguraon → System → Live View → Channel-Zero .
Digital Video Recorder User Manual
38