HIKVISION DS-7100HGHI-K1/R Series - Page 88

6. Reboot the video recorder to
acvate the new storage mode sengs.
7. Aer reboot, go to Conguraon → Record → Storage .
8. Click
of desired HDD to set the group.
9. Select Group number for the current HDD.
10. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
1. Go to
Conguraon → Record → Storage Mode .
2. Select Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in the text
elds of Max. Record Capacity (GB) and Max. Picture
Capacity (GB).
Figure 6-25 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Reboot the video recorder to
acvate the new sengs.
Digital Video Recorder User Manual
74