45
“Active Frame” to “Position” button, press【ENTER】to enter into camera name
position setup interface, as picture below in that interface, you can use【È】【Ç】【Æ】
【Å】keys to move camera name position. When the position is fixed, press
【ENTER】and return “Camera” menu, and press “Confirm” button to save it. In the
“Image Setup” menu, press “Cancel” button or【ESC】key, you can abort the
modification.
OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it
includes displaying system time and camera name.
OSD settings include: System time, time format, time display position, camera
name, camera name display position, etc.
System Time
In “Display” menu, you can setup DVR system date and time.
Move your active frame to “Date/Time setup” item, and press enter.
Date Display Mode: Move the active frame to Date Display Mode then press
【EDIT】 then use【↑】【↓】key to select OSD format. There are following OSD
formats:
MM DD YY
MM DD YY
YY MM DD
YY MM DD Here YY means year, MM means month, DD means day.
You can also enable DST (Daylight-saving Time) function here. Shown as fig
5.10
Fig 5.10 Date/time setup
Date OSD Position
To Next Page
Loading...
Need help?
General