HIKVISION DS-7108NI-E1/V/W User Manual

Quick Operation Guide of Network Video Recorder
24
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
Step:
Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended
that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
After the device starting up, the wizard will guide you through the initial settings,
including modifying password, date and time settings, network settings, HDD initializing,
and recording.
To shut down the NVR:
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown

HIKVISION DS-7108NI-E1/V/W Specifications

General

Maximum resolution	- pixels
Video input channels	8 channels
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	12 W
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	4
Supported network protocols	IPv6, UPnP, SNMP, NTP, SADP, DDNS, SMTP, NFS, iSCSI
HDD capacity	0 GB
HDD interface	-
Maximum storage capacity	- TB
Number of HDDs installed	0

Weight and Dimensions

Width	870 mm
Height	157 mm
Weight	530 g