Step 3: Setup the password for new user
After you add one new user, the password is null. You can skip this step if you do
not want to change the password.
In the users list box of “User Management” menu, use [] [] keys to select the
new user name, then use [] key to the password edit box. Press [EDIT] key to enter
edit box, use numeric keys to input the new password.
Step 3: Setup the rights for new user
The new added user has not any operational rights. You must setup rights for him.
In the users list box of “User Management” menu, use [] [] keys to select the
new user name, then use [] key to “Default Privileges” button, press [ENTER], the
user will have the default rights. The default rights include local playback, remote
playback and view log.
If you want to define the detail rights, move “Active Frame” to “Setup
Privileges” button and press [ENTER] to enter rights setup menu as follows: Shown
as Fig. 5.6
Fig. 5.6 Set user right
Operational rights are divided into “Local” and “Remote”. You can assign the
necessary rights to the user. Use [] [] key to move “Active Frame” to the
corresponding right items, press [ENTER] or [EDIT] key to enable or disable the item.
“” means assign the right to that user.
Step 4: Save the new user’s password and rights
In the “User Management” menu, press “Confirm” button, the user’s password
and rights will be saved and return main menu. If you press “Cancel” button, the
configuration will be abandoned.
User rights description
To Next Page
Loading...
Need help?
General