EasyManuals Logo

HIKVISION DS-7208HTHI-K2 User Manual

HIKVISION DS-7208HTHI-K2
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
Network Video Recorder User Manual
102
Chapter 8 Disk Array
This chapter is applicable for DS-7300/8100/9000HUHI-K and DS-7300/8100/9000HTHI-K series
DVR.
Purpose:
Disk array is a data storage virtualization technology that combines multiple physical disk drive
components into a single logical unit. An array stores data over multiple HDDs to provide enough
redundancy so that data can be recovered if one disk fails. Data is distributed across the drives in
one of several ways called "RAID levels", depending on what level of redundancy and performance
is required.
Create Disk Array
Purpose:
The device supports the disk array that is realized by software. You can enable the RAID function as
required. Two ways are available for creating array: one-touch configuration and manual
configuration. The following flow chart shows the process of creating array.
Enable RAID
Purpose:
Perform the following steps to enable the disk array function.
Go to Storage > Advanced.
Advanced

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7208HTHI-K2 and is the answer not in the manual?

HIKVISION DS-7208HTHI-K2 Specifications

General IconGeneral
Voltage12 V
Product colorBlack
LED indicatorsYes
Channels quantity8 channels
Maximum frame rate30 fps
Audio formats supportedG.711
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.265 Pro+, H.265 Pro, H.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Playback resolutions supported8MP/5MP/4MP/3MP/1080p/720p/WD1/4CIF/VGA/CIF
Audio input4
BNC input ports8
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSerial ATA
Number of HDDs supported2
Power consumption (max)20 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth320 mm
Width380 mm
Height48 mm
Weight2000 g

Related product manuals