HIKVISION DS-7208HTHI-K2 User Manual

Network Video Recorder User Manual
10
 Supports POS triggered recording for DS-7300/8100HQHI, DS-7300/8100/9000HUHI-K, DS-
7300/8100/9000HTHI-K, iDS-7316HUHI-K4/16S and iDS-9016HUHI-K8/16S series DVR;
 8 recording time periods with separated recording types;
 Supports Channel-Zero encoding (except DS-7216HGHI-K1 and DS-7216HGHI-K2);
 Main stream and sub-stream configurable for simultaneous recording (except HGHI-K series);
 Pre-record and post-record for motion detection triggered recording, and pre-record time for
schedule and manual recording;
 Searching record files and captured pictures by events (alarm input/motion detection);
 Customization of tags, searching and playing back by tags;
 Locking and unlocking of record files;
 Local redundant recording and capture;
 When Turbo HD, AHD, or HDCVI input is connected, the information including the resolution
and frame rate will be overlaid on the bottom right corner of the live view for 5 seconds.
When CVBS input is connected, the information such as NTSC or PAL will be overlaid on the
bottom right corner of the live view for 5 seconds.
 Searching and playing back record files by camera number, recording type, start time, end
time, etc.;
 Smart playback to go through less effective information;
 Zooming in for any area when playback;
 Multi-channel reverse playback;
 Supports pause, fast forward, slow forward, skip forward, and skip backward when playback,
locating by dragging the mouse on the progress bar;
 4/8/16-ch synchronous playback;
 Manual capture, continuous capture of video images and playback of captured pictures.
Backup
 Exports data by a USB, and SATA device;
 Exports video clips when playback;
 Video and Log and Player are selectable to export for backup;
 Management and maintenance of backup devices.
Alarm and Exception
 Configurable arming time of alarm input/output;
 Alarms for video loss, motion detection, video tampering, illegal login, network disconnected,
IP confliction, record/capture exception, HDD error, and HDD full, etc.;
 Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email
and alarm output;
 One-key disarms the linkage actions of the alarm input;
 PTZ linking for the VCA alarm;

HIKVISION DS-7208HTHI-K2 Specifications

General

Voltage	12 V
Product color	Black
LED indicators	Yes
Channels quantity	8 channels
Maximum frame rate	30 fps
Audio formats supported	G.711
Maximum video resolution	3840 x 2160 pixels
Video compression formats	H.265 Pro+, H.265 Pro, H.264, H.264+, H.265, H.265+
Analog signal format system	NTSC, PAL
Playback resolutions supported	8MP/5MP/4MP/3MP/1080p/720p/WD1/4CIF/VGA/CIF
Audio input	4
BNC input ports	8
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	Serial ATA
Number of HDDs supported	2
Power consumption (max)	20 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Optical drive included	No

Weight and Dimensions

Depth	320 mm
Width	380 mm
Height	48 mm
Weight	2000 g