EasyManuals Logo

HIKVISION DS-7208HTHI-K2 User Manual

HIKVISION DS-7208HTHI-K2
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Network Video Recorder User Manual
62
If the power consumption of the DVR is lower than that of AF camera, when AF or AT
camera is connected, there is no video and “Insufficient Power for PoCis overlaid on
the live view image.
If the power consumption of the DVR is higher than that of the AF camera and lower
than that of the AT camera, when AF camera is connected, it is powered on normally;
when AT camera is connected, it is powered on and then powered off, and there is no
video and “Insufficient Power for PoCis overlaid on the live view image.
If the power consumption of the DVR is higher than that of the AT camera, when AF or
AT camera is connected, it is powered on normally.
Step 4 Check the connected AF or AT camera number and the connectable camera number.
PoC Status
Only Hikvision PoC camera is supported.
The maximum connectable AT/AF camera number varies with different models.
Please turn off the PoC function if the camera does not support PoC, or the camera is not
produced by Hikvision. Otherwise, it may result in permanent damage to the camera or DVR.
Configure Signal Input Channel
Purpose
You can configure the analog and IP signal input types.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7208HTHI-K2 and is the answer not in the manual?

HIKVISION DS-7208HTHI-K2 Specifications

General IconGeneral
Voltage12 V
Product colorBlack
LED indicatorsYes
Channels quantity8 channels
Maximum frame rate30 fps
Audio formats supportedG.711
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.265 Pro+, H.265 Pro, H.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Playback resolutions supported8MP/5MP/4MP/3MP/1080p/720p/WD1/4CIF/VGA/CIF
Audio input4
BNC input ports8
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSerial ATA
Number of HDDs supported2
Power consumption (max)20 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth320 mm
Width380 mm
Height48 mm
Weight2000 g

Related product manuals