EasyManuals Logo

HIKVISION DS-7208HTHI-K2 User Manual

HIKVISION DS-7208HTHI-K2
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Network Video Recorder User Manual
72
Configure Live View Settings
Purpose:
Live View settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Go to System > Live View > General.
Live View-General
Configure the live view parameters.
Video Output Interface: Select the video output to configure.
Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.
Dwell Time: The time in seconds to dwell between switching of cameras when enabling auto-
switch in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.
Volume: Adjust the volume of live view, playback and two-way audio for the selected output
interface.
Event Output: Select the output to show event video.
Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event screen.
Click OK to save the settings.
Configure Live View Layout
Go to System> Live View>View.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7208HTHI-K2 and is the answer not in the manual?

HIKVISION DS-7208HTHI-K2 Specifications

General IconGeneral
Voltage12 V
Product colorBlack
LED indicatorsYes
Channels quantity8 channels
Maximum frame rate30 fps
Audio formats supportedG.711
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.265 Pro+, H.265 Pro, H.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Playback resolutions supported8MP/5MP/4MP/3MP/1080p/720p/WD1/4CIF/VGA/CIF
Audio input4
BNC input ports8
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSerial ATA
Number of HDDs supported2
Power consumption (max)20 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth320 mm
Width380 mm
Height48 mm
Weight2000 g

Related product manuals