Digital Video Recorder User Manual
138
Step 5 Set the rules and areas for smart search of VCA event or motion event.
Line Crossing Detection
Select the button , and click on the image to specify the start point and end point of the
line.
Intrusion Detection
Click the button, and specify 4 points to set a quadrilateral region for intrusion detection.
Only one region can be set.
Motion Detection
Click the button and then click and draw the mouse to set the detection area manually.
You can also click the button to set the full screen as the detection area.
Step 6 Click to configure the smart settings.
Figure 6-15 Smart Settings
Skip the Non-Related Video: The non-related video will not be played if this function is
enabled.
Play Non-Related Video at: Set the speed to play the non-related video. Max. 8/4/2/1 are
selectable.
Play Related Video at: Set the speed to play the related video. Max. 8/4/2/1 are selectable.
Pre-play and post-play is not available for the motion event type.
Step 7 Click to search and play the matched video files.
Step 8 (Optional) Click to filter the searched video files by setting the target characters,
including the gender and age of the human and whether he/she wears glasses.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
