EasyManuals Logo

HIKVISION DS-7316HUHI-K4 User Manual

HIKVISION DS-7316HUHI-K4
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
Network Video Recorder User Manual
105
Rebuild Array
Purpose:
The status of array includes Functional, Degraded and Offline. To ensure the high security and
reliability of the data stored in array, you should take immediate and proper maintenance at arrays
according their status.
Functional: No disk loss in the array.
Offline: The number of lost disks has exceeded the limit.
Degraded: If amount of HDD fail in array, array degrades. You should recover it to Functional by
array rebuilding.
Configure Hot Spare Disk
Purpose:
Hot spare disks are required for disk array automatic rebuilding.
Go to Storage > RAID Setup > Physical Disk.
Physical Disk
Click of an available HDD to set it as the hot spare disk.
Automatically Rebuild Array
Purpose:
The device can automatically rebuild degraded arrays with the hot spare disks.
Before you start:
Create hot spare disks. For details, refer to Chapter 8.2.1 Configure Hot Spare Disk.
The device will automatically rebuild the degraded arrays with the hot spare disks. Go
to Storage > RAID Setup > Array to view rebuilding progress.
Array List

Table of Contents

Other manuals for HIKVISION DS-7316HUHI-K4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7316HUHI-K4 and is the answer not in the manual?

HIKVISION DS-7316HUHI-K4 Specifications

General IconGeneral
Bit rate10000 Kbit/s
InternalNo
Product colorBlack
Video streamingYes
Maximum frame rate30 fps
Audio input channels4.0 channels
Audio output channels2.0 channels
Audio formats supportedG.711 μ-law
Maximum video resolution1920 x 1080 pixels
Video compression formatsH.264, H.265, H.265+
Number of simultaneously playbacked channels16 channels
Audio inputRCA
RS-232 ports1
BNC input ports16
Alarm output channels4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage100 - 240 V
Power consumption (typical)65 W
Number of users128 user(s)
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF, SNMP
HDD interfaceeSATA
Maximum HDD capacity10000 GB
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth390 mm
Width445 mm
Height70 mm
Weight5000 g

Related product manuals