HIKVISION DS-7616NXI-I2/16P/4S User Manual

Network Video Recorder User Manual
103
Step 5 Select the channel(s) in Trigger Channel settings you want to make full screen monitoring.
Auto-switch will terminate once the alarm stops and back to the live view interface.
11.2.2 Configure Audio Warning
The audio warning enables the system to trigger an audible beep when an alarm is detected.
Step 1 Go to System > Live View > General.
Step 2 Enable the audio output and set the volume.
Step 3 Go to the Linkage Action interface of the alarm detection (e.g., motion detection, video
tampering, etc.).
Step 4 Select the Audio Warning alarm linkage action.
11.2.3 Notify Surveillance Center
The device can send an exception or alarm signal to the remote alarm host when an event occurs.
The alarm host refers to the PC installed with client software (e.g., iVMS-4200, iVMS-5200).
Step 1 Go to System > Network > Advanced > More Settings.
Step 2 Set the alarm host IP and alarm host port.
Step 3 Go to the Linkage Action interface of the alarm detection (e.g., motion detection, video
tampering, etc.).
Step 4 Select the Notify Surveillance Center.
11.2.4 Configure Email Linkage
The system can send an email with alarm information to a user or users when an alarm is
detected.
Please refer to Chapter 16.7 Configure Email for details of Email configuration.
Step 1 Go to System > Network > Advanced.
Step 2 Configure the Email settings.
Step 3 Go to the Linkage Action interface of the alarm detection (e.g., motion detection, video
tampering, etc.).
Step 4 Select the Send Email alarm linkage action.
11.2.5 Trigger Alarm Output
The alarm output can be triggered by the alarm input, motion detection, video tampering
detection, line crossing detection, and all other events.

HIKVISION DS-7616NXI-I2/16P/4S Specifications

General

Model	DS-7616NXI-I2/16P/4S
Category	Network Hardware
Two-Way Audio	Yes
Decoding Format	H.265+/H.265/H.264+/H.264
PoE	Yes
Input Bandwidth	160 Mbps
Output Bandwidth	160 Mbps
Consumption (without HDD)	≤ 15W
Working Humidity	10% to 90%
Operating Humidity	10% to 90%
Video Input	16 Channel
IP Video Input	16 channels
Video Output	HDMI, VGA
Max Resolution	12 MP
Audio Output	1-ch, RCA
Decoding Capability	16 × 1080p @ 30 fps
Network Interface	1 × RJ45 10/100/1000 Mbps
PoE Ports	16
USB Interface	2 × USB 2.0
Alarm In/Out	4/4
HDD Bays	4
SATA	4 SATA interfaces
Capacity	Up to 10TB per HDD
Power Supply	100 to 240 VAC, 50 to 60 Hz
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Operating Temperature	-10 °C to 55 °C (14 °F to 131 °F)