Network Video Recorder User Manual
131
Chapter 13 Smart Search
With the configured VCA detection, the NVR supports the search for the pictures, video files and
resources of the human body detection, behavior analysis, face detection, people counting and
heat map results.
13.1 Face Search
Purpose:
When there are detected face picture captured and saved in HDD, you can enter the Face Search
interface to search the picture and play the picture related video file according to the specified
conditions.
Step 1 Go to Smart Analysis > Smart Search > Face Search.
Step 2 Select the IP camera for the face search.
Figure 13-1 Face Search
Step 3 Specify the start time and end time for search the captured face pictures or video files.
Step 4 Click Start Search to start searching.
Step 5 Double click on a face picture to play its related video file in the view window on the top
right Play the face picture related video file.
Step 6 To export the captured face pictures to local storage device, connect the storage device to
the device and click Export.
13.2 Vehicle Search
Purpose:
You can search and view the matched captured vehicle pictures.
Step 1 Go to Smart Analysis > Smart Search > Vehicle Search.
Step 2 Select the IP camera for the vehicle search.
Step 3 Set search conditions.
To Next Page
Loading...
Need help?
General
