Network Video Recorder User Manual
157
Figure 18-3 S.M.A.R.T Settings Interface
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the
checkbox of the Continue to use the disk when self-evaluation is failed item.
18.1.3 Bad Sector Detection
Step 1 Go to Maintenance > HDD Operation > Bad Sector Detection.
Step 2 Select the HDD No. in the dropdown list you want to configure.
Step 3 Select All Detection or Key Area Detection as the detection type.
Step 4 Click the Self-Test button to start the detection.
To Next Page
Loading...
