EasyManuals Logo

HIKVISION DS-96128NI-I16 User Manual

HIKVISION DS-96128NI-I16
241 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Network Video Recorder User Manual
111
Figure 7. 15 Add Working Device
3. You can view the working status of the hot spare device on the Working Status list.
When the working device works properly, the working status of the hot spare device is displayed as No
record.
Figure 7. 16 No Recording
When the working device gets offline, the hot spare device will record the video of the IP Camera connected
to the working device for backup, and the working status of the hot spare device is displayed as Backing up.
The record backing up can be functioned for 1 working device at a time.
Figure 7. 17 Backing up
When the working device comes online, the lost video files will be restored by the record synchronization
function, and the working status of the hot spare device is displayed as Synchronizing.
The record synchronization function can be enabled for 1 working device at a time.

Table of Contents

Other manuals for HIKVISION DS-96128NI-I16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-96128NI-I16 and is the answer not in the manual?

HIKVISION DS-96128NI-I16 Specifications

General IconGeneral
Audio system2-way
Input bandwidth576 Mbit/s
Output bandwidth512 Mbit/s
Maximum frame rate30 fps
Maximum resolution4096 x 2160 pixels
Alarm input channels16
Video input channels128 channels
Alarm output channels8
Supported resolutions4096 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768
Video formats supportedH.264, H.264+, H.265, H.265+, MPEG4
RAID levels0, 1, 5, 6, 10
HDD capacity- GB
RAID supportYes
HDD interfaceSATA
Maximum storage capacity160 TB
Number of HDDs installed0
eSATA ports quantity1
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports4
Supported network protocolsIPv6, HTTPS, UPnP, SNMP, NTP, SADP, SMTP, NFS, iSCSI, PPPoE, DDNS
Wi-FiNo
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)140 W
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Product colorBlack
Display typeLCD
Display diagonal7 \
Weight and Dimensions IconWeight and Dimensions
Depth494 mm
Width442 mm
Height146 mm
Weight16000 g

Related product manuals