Network Video Recorder User Manual
79
Figure 3-8 Live View- Camera Order
1) Select a View mode in , including 1/4/6/8/16/25/32/36/64-window
division modes are supported depending on different models.
2) Select the small window, and double-click on the channel number to display the channel
on the window.
3) You can click button to start live view for all the channels and click to stop all the
live view.
4) Click the Apply button to save the setting.
You can also click-and-drag the camera to the desired window on the live view interface to set
the camera order.
Step 3 Set the stream type for live view of camera.
1) Click the More Settings to enter the more settings interface.
2) Select the camera to configure from the list.
3) Select the stream type to main stream, sub-stream or Auto.
Figure 3-9 Stream Type Settings
4) Click Apply to save the settings.
5) (Optional) You can click the Copy button to copy the stream type settings of the current
camera to other camera (s).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
