HIKVISION DS-E04NI-Q1 - Page 40

Figure 5-12 Intrusion Detecon
2. Select a camera.
3. Turn on Enable.
4. Set
detecon rules and detecon areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Set Sensivity. The size of the object that can trigger the alarm. The higher the value is, the
easier the
detecon alarm can be triggered. Its range is [1-100].
3) Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
4) Click Draw Area to draw a quadrilateral
detecon region.
5. Set the arming schedule. Refer to for
Congure Arming Schedule for details.
6. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
7. Click Apply.
Region Entrance
Detecon
Region entrance detecon detects objects that enter a predened virtual region.
Steps
1. Go to Conguraon → Camera → Event → Region Entrance .
Network Video Recorder User Manual
27