Fingerprint Time Attendance Terminal
109
Auto Time Synchronization
The Auto Time Synchronization of the Access Control System can operate auto time
adjustment to all access control devices of the Access Control System according to
specified period and time.
Card Reader Configuration
The Card Reader Configuration is for Access Control System to read the card by
setting Card Reader parameters. For now D8E-U-A-III and DS-K1F100-M card reader
types are supported.
Fingerprint Machine
The Fingerprint Machine is for Access Control system to collect fingerprints.
Manual Capture Configuration
The Manual Capture Configuration is for Access Control system to take photos
remotely.
Auto Time Synchronization
Steps:
1. Open the System Configuration page.
2. Click the Common tab to enter the Common Settings interface.
3. Tick the checkbox to enable Auto Time Synchronization.
4. Select the matched day and input the time to operate the time adjustment.
5. Click to save the settings.
To Next Page
Loading...
Need help?
General
