Fingerprint Time Attendance Terminal
21
3.4.1 Adding User
You can add users by editing the ID No., the user name, the card No. You can also
scan the user fingerprint, set the password, the department, the role and the
authentication mode.
Steps:
1. Press the key to enter the New (new user) interface and input the ID No.
Notes:
The ID No. refers to the user attendance serial No.
The ID No. should be between 1 and 99999999 and should not start
with 0.
The ID No. can be used for once.
By default, the ID No. will be increased in sequence.
2. Enter the new user name.
1) Press key to enter the editing interface. Press key to shift input
mode. Chinese, Digits/Lowercase Letters, Digits/Uppercase Letters and
symbols are supported.
2) Enter the use name and press the OK key to confirm and exit the
interface.
To Next Page
Loading...
Need help?
General
