HIKVISION DS-K1A801MF - Chapter 2 Installation Guide; Wall Mounting Procedure

Fingerprint Time Attendance Terminal
6
Chapter 2 Installation
2.1 Wall Mounting
Steps:
1. Drill holes on the wall or other places according to the mounting template
(supplied).
Note: The minimum bearing weight of the wall or other places should be three
times heavier than the device weight.
2. Insert the screw sockets of the setscrews in the drilled holes.
3. Fix and fasten the screws in the sockets on the wall or other places.
4. Align the three holes on the device
plate with the fixed screws and hang
the device on the wall.