Fingerprint Time Attendance Terminal
8
Chapter 3 Basic Operation
The suggested working flow is as follows:
Device Activation: Activate the device before first using.
Login: Hold the OK key for 3s to login the device main interface.
Parameters Configuration: Configure the communication, the system, and the time.
User Management: Add, edit and delete the users.
Department Management: Edit the default department.
Shift Management: Configure the normal shift and the man-hour shift.
Holiday Management: Configure the holiday.
Shift Schedule Management: Schedule by department or by individual.
Note: The device has configured the default department, the default shift, the
default shift schedule and the default system information. You are able to use the
device directly after adding the user.
3.1 Device Activation
Purpose:
You should activate the device before the first login. After powering on, the system
will switch to activate notifying interface.
Activation via SADP and activation via the iVMS-4200 Client Software are supported.
The default values of the terminal are as follows:
The default IP address: 192.0.0.64
The default port No.: 8000
The default user name: admin
To Next Page
Loading...
