Fingerprint Time Attendance Terminal
86
Steps:
1. Click Anti-passing Back and select an access control point.
2. You can set the name for the controller and select the card reader as the
beginning of the path.
3. In the list, click the text filed of Card Reader Afterward and select the linked card
readers.
Example: If you select Reader In_01 as the beginning, and select Reader In_02,
Reader Out_04 as the linked card readers. Then you can only get through the
access control system by swiping the card in the order as Reader In_01, Reader
In_02 and Reader Out_04.
4. Check the checkbox of Enable Anti-Passing back.
5. Click and then click to take effect of the
new settings.
Note: The attendance device does not support the function.
4.4 Attendance Management
Purpose:
After adding the device and person, you can set the person shift, set the holiday,
manage the person attendance and view the card swiping log.
Click icon on the control panel to enter the Attendance
Configuration interface.
4.4.1 Shift Group Management
Purpose:
On the shift group management interface, you can add, edit, and delete shift groups
for attendance management.
To Next Page
Loading...
