Fingerprint Time Attendance Terminal
15
1. Move the cursor to the Wi-Fi, and press the OK key to enter the Wi-Fi
interface.
2. Move the cursor to the icon and press the OK key to enable the WLAN.
3. Select a network and press the OK key to enter the Wi-Fi Setting interface.
4. Input the Wi-Fi password, and configure the IP mode the IP address, the
subnet mask and the gateway.
Note: The password supports numbers, uppercase letters, lowercase letters
and symbols.
5. Press the ESC key and select Yes to save the parameters and exit the interface.
3.3.2 System Settings
Purpose:
You are able to set the system parameters, manage the data, restore default
parameters and upgrade the device.
To Next Page
Loading...
