Fingerprint Time Attendance Terminal
31
5. Press the ESC key and select Yes to save the settings and exit the interface.
3.7 Holiday Management
Purpose:
You are able to configure the attendance holiday. The attendance will not be recorded
during the holiday.
3.7.1 Adding the Holiday
Steps:
1. In the Holiday interface, press the key to enter the New (New Holiday)
interface.
2. Enter the holiday No., the holiday name, the holiday start time and the end time.
3. Press the ESC key and select Yes to save the settings and exit the interface. The
new holiday will be displayed in the Holiday list.
3.7.2 Searching the Holiday
Steps:
1. In the Holiday List interface, enter the target holiday name.
2. Press the OK key to search.
3.7.3 Editing and Deleting the Holiday
Steps:
1. Select a target holiday in the Holiday List interface to enter the Holiday Settings
interface.
To Next Page
Loading...
Need help?
General
