Fingerprint Time Attendance Terminal
30
2. Select a man-hour shift type in the list.
Notes:
By default, the man-hour shift type includes 6H/Day (6 hours per day),
4H/Day (4 hours per day), and 30 custom types.
The following steps will take Custom 1 as an example.
3. Press the OK key to enter the Man-Hour Shift configuration interface.
4. Select Edit to enter the Edit Shift interface.
You can edit the shift name, the shift duration (work duration), the latest time
on-work and the break time.
Notes:
The shift No. cannot be edited.
The break time will not be counted into the working hour.
If the Latest Time (On-Work) is set to 0, the Latest Time function will not
be enabled.
You can also select Reset and press the OK key to reset the settings.
To Next Page
Loading...
