Fingerprint Time Attendance Terminal
26
2. Press the OK key to enter the configuration interface.
3. Select Edit and press the OK key.
4. Edit the department name, the shift type and the shift name.
5. Press the ESC key and select Yes to save the settings and exit the interface.
Notes:
The department name supports numbers, uppercase letters,
lowercase letters, Chinese characters and symbols.
The department name supports up to 32 characters.
You can configure the shift in the Shift Management. For detailed
information, see Section 3.6 Shift Management.
By default, the system contains 32 departments.
You can also select Reset to reset the settings.
3.5.2 Searching the Department
Purpose:
To Next Page
Loading...
