Fingerprint Time Attendance Terminal
12
4. Select an inactive device from the device list.
5. Click Activate to pop up the Activation interface.
6. Create a password and confirm the new password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
7. Click OK to start activate.
8. Click to configure the device IP address, mask address,
gateway address, port No.
9. Input the password and click OK to apply.
Note: The device IP address should be the same with the PC.
The device will switch to the initial interface:
To Next Page
Loading...
Need help?
General
