HIKVISION DS-K1A801MF User Manual

Fingerprint Time Attendance Terminal
17
Time Format:
MM/DD/YYYY, MM.DD.YYYY, DD-MM-YYYY, DD/MM/YYYY,
DD.MM.YYYY, YYYYMMDD, YYYY-MM-DD, YYYY/MM/DD,
YYYY.MM.DD and MM-DD-YYYY are available.
Keypad Sound:
Move the cursor to or and press the OK key to
enable or disable the keypad sound.
Voice Prompt:
Move the cursor to or and press the OK key to
enable or disable the prompt audio.
Note: The icon represents the keypad sound is enabled.
The icon represents the keypad sound is disabled.
Voice Volume:
High, Medium and low can be selected.
Sleeping:
Set the device sleeping waiting time (Minute). If you set the
sleeping time to 30min, the device will sleep after 30 min
without any operation.
Note: If you set the sleeping time to 0, the device will not sleep.
Interval:
Set the attendance repeating time interval (Second) of a
person. The attendance is invalid if you swipe the card
repeatedly within the time interval. (Set the authentication
mode to Card).
Note: The time interval should be between 0 and 255s.
Record over
Threshold Prompt:
If the attendance record memory reaches the configured value,
the system will pop up a prompt to remind you.
Authentication
Mode:
The authentication mode can be switched among
“card/fingerprint”, “card”, “fingerprint”, “card & password”,
“card & fingerprint”, “fingerprint & password”, “card &
fingerprint” and “password”, and “card/password (The
password here refers to the card ID No. and the user
password)”.
Record Delete:
When the function is enabled, the terminal will delete the first
3000 attendance records when the memory is full, in order to
save the new attendance records. By default, the function is
enabled. See Section 5.2 Attendance Record Delete Rule.
3. Press the ESC key and select Yes to save the settings and exit the interface.
Managing Data
Purpose:

HIKVISION DS-K1A801MF Specifications

General

Brand	HIKVISION
Model	DS-K1A801MF
Category	Touch terminals
Language	English