Fingerprint Time Attendance Terminal
59
5. Click to confirm editing.
6. Click , and apply permissions in the permission
management to apply configurations to the device. For details, see
Section 4.3 Permission Management.
Setting Wiegand
Purpose:
You can set the Wiegand channel and the communication mode.
Steps:
1. In the Edit Access Controller interface, click the Wiegand Settings button to enter
the Wiegand Settings interface.
2. Select the Wiegand channel and the communication mode in the dropdown list.
3. Click OK to save the settings.
Notes:
After changing the communication direction, the device will be rebooted.
A prompt will be pop-up after changing the communication direction.
The attendance device does not support the function.
To Next Page
Loading...
