Fingerprint Time Attendance Terminal
64
infoarmation list to pop up the adding person interface.
2. Input the Person Name (required), Gender, ID Card, etc., upload the photo of the
person and click the icon to finish adding.
Note: The format of the photo should be .jpg, or .jpeg.
3. You can double-click an added person to edit its information.
4. You can click to select a person, and click the button to delete it.
If a card is associated with the current person, the association will be invalid after
the person is deleted.
Inputting Fingerprint
Steps:
1. In the personal information interface, click the Fingerprint button.
2. Click the Start Register button, and select the fingerprint to be input.
3. Click the Save button to save the parameter.
Note: Click the Delete Fingerprint button to delete the fingerprint.
Click the Delete All button to clear all fingerprints input.
To Next Page
Loading...
Need help?
General
