Face Recognition Terminal Quick Start Guide
25
Set the device installed building No.
Set the device installed Unit No.
Tap or to disable or enable the voice promt.
Adjust the voice volume. The larger the value, the louder the volume.
If the device supports swiping CPU card, you can enable the function and
the device can read the CPU card information.
You can select either others or indoor according to actual environment.
The live view on the device screen will enter the IR mode.
Auto Adjust White
Light Brightness
If enabling the function, the device will auto adjust the white light
brightness according to the illumination.
If disabling the function, the white light will turn on all the time and the
brightness is the configured value of the supplement light brightness
(white light).
Supplement Light
Brightness (Infrared
Light)
Set the IR light brightness when the IR light is enabled.
Supplement Light
Brightness (White
Light)
Set the supplement white light’s brightness. The brightness ranges from
0 to 100.
0 refers to turning off the light. 1 refers to the darkest, and 100 refers to
To Next Page
Loading...
Need help?
General
