HIKVISION DS-K1T6QT-F43EW User Manual

Figure 8-5 Authencaon Sengs
2.
Tap Save.
Device Type
Main Card Reader
You can
congure the device card reader's parameters. If you select main card reader, you
need to congure the following parameters: Card Reader Type, Card Reader Descripon,
Enable Card Reader,
Authencaon, Recognion Interval (s), Minimum Card Swiping
Interval (s), Max. Authencaon Failed Aempts Alarm/Alarm of Max. Failed Aempts,
Enable Tampering
Detecon and Enable Card No. Reversing.
Sub Card Reader
You can congure the connected peripheral card reader's parameters. If you select sub
card reader, you need to congure the following parameters: Card Reader Type, Card
Reader
Descripon, Enable Card Reader, Authencaon, Recognion Interval (s), Max.
Authencaon Failed Aempts Alarm/Alarm of Max. Failed Aempts, Enable Tampering
Detecon, Communicaon with Controller Every (s) and Max. Interval When Entering
Password (s).
Card Reader Type
Get card reader type.
Card Reader
Descripon
Get card reader descripon. It is read-only.
DS-K1T6QT-F43 Series Face Recognion Terminal User Manual
79

HIKVISION DS-K1T6QT-F43EW Specifications

General

Brand	HIKVISION
Model	DS-K1T6QT-F43EW
Category	IP Access Controllers
Language	English