HIKVISION DS-KD-KK

3. Click Save to enable the sengs.
SIP Seng
Steps
1. Click Network → Basic Sengs → SIP to enter the sengs
page.
Figure 6-8 SIP Sengs
2. Check Enable VOIP Gateway.
3. Congure the SIP parameters.
4. Click Save to enable the sengs.
FTP Sengs
Steps
1. Click Network → Advanced → FTP to enter the sengs page.
Figure 6-9 FTP Sengs
2. Check Enable FTP.
3. Select Server Type.
4. Input the Server IP Address and Port.
5. Congure the FTP Sengs, and the user name and password
are required for the server login.
42