HIKVISION DS-KD-KK

Note
●
You can select Cropping Resoluon as 704*576, 1280*720,
or 1920*1080.
●
You can zoom in or zoom out the image by selecng
Cropping Resoluon aer clicking Save.
6.4.6 Event Sengs
Moon Detecon
Moon detecon detects the moving objects in the congured
security area, and a series of acons can be taken when the alarm
is triggered.
Steps
1. Click Event → Basic Event →
Moon to enter the sengs page.
Figure 6-16 Moon Detecon
2. Click to Enable Moon Detecon.
3. Click Draw Area. Click and drag to draw a moon detecon
area.
Clear Area
Click Clear All to clear all of the areas.
Adjust
Sensivity
Move the slider to set the sensivity of
the detecon.
4. Click Arming Schedule to edit the arming schedule.
5. Click on the me bar and drag to select the me period. Click
Save to save the sengs.
Delete
Schedule
Click Delete to delete the current arming
schedule.
6. Click Linkage Method to enable the linkages.
Nofy Security Center
Send an excepon or alarm signal to the remote
management soware when an event occurs.
7. Click Save to enable the sengs.
Event Linkage
47