HIKVISION DS-KD-KK

Figure 6-14 Backlight
1) Check to enable BLC.
2) Select BLC Area.
6. Click Save to enable the
sengs.
OSD Sengs
You can customize the camera name, me/date format on the
live view.
Steps
1. Click Image → OSD to enter the
sengs page.
Figure 6-15 OSD
2. Check to enable Display Name, Display Date or Display Week
at your actual needs.
3. Edit the Camera Name.
Note
You can edit the camera name only when Display Name is
enabled.
4. Select from the drop-down list to set the Time Format and
Date Format.
5. Click Save to enable the sengs.
Target Cropping
Steps
1. Click Image → Crop to enter the page.
2. Check Enable Target Cropping to enable the funcon.
3.
Click
to capture photo.
4.
Click to start recording.
5. Select Cropping Resoluon.
6. Click Save.
46