HIKVISION DS-KD-KK

Permission Password
Steps
1. Click Access Control → Password Sengs to enter the sengs
page.
Figure 7-21 Password Sengs
2. Select Password Type.
3. Enter and conrm the password.
4. Click Save to enable the sengs.
Door Parameters
Set the parameters of the door which is linked to the device.
Steps
1. Click Access Control → Door Parameters to enter the
sengs
page.
Figure 7-22 Door Parameters
2. Select Door No., and edit the Name.
3. Set Open Duraon. When the me to open over the open
duraon you set, the door will be locked again.
4. Select Relay Reverse as ON or Disable.
5. Click Save to enable the sengs.
Card Security
Click Access Control → Card Security to enter the sengs page.
Slide to enable card encrypon parameters.
Click Save to enable the sengs.
Elevator Control
Before You Start
Make sure that the door
staon is in the mode of main door
staon. Only the main door staon supports elevator control
funcon.
72