Video Intercom Module Door Station·Quick Start Guide
24
The suggested size of screw hole is 6 (diameter) × 25 (depth) mm.
The suggested length of cables left outside is 270 mm.
4. Remove the sticker and insert the expansion sleeves into the screw holes.
5. Fix the locating plates to the frame with screws.
Figure 3-20 Install Locating Plate
6. Insert the mounting frame together with the locating plates into the hole, and fix it
with 4 expansion bolts.
Figure 3-21 Install Mounting Frame
The mounting frame should be placed exactly as below for this step. The tamper plate
should be at the low right of the first grid.
To Next Page
Loading...
