HIKVISION DS-KH9510-WTE1

DS-KH9510-WTE1 Video Intercom Indoor Station Configuration Guide
CG DS-KH9510-WTE1 Video Intercom 031621NA 18
Click System on the remote configuration page to display the device information: Device Information,
General, Time, System Maintenance, User, and RS-485.
• Device Information: Click Device Information to enter device basic information page. You can view basic
information (device type and serial no.) and version information of the device.
Figure 14, Device Information
• General: Click General to enter device general parameters settings page. You can view and edit the
device name and device ID.
Figure 15, General
• Time: Click Time to enter the device time settings page. Select Time Zone or Enable NTP. Click Save to
save the time settings.
Figure 16, Synchronize Time