HIKVISION DS-KH9510-WTE1 Configuration Guide

DS-KH9510-WTE1 Video Intercom Indoor Station Configuration Guide
CG DS-KH9510-WTE1 Video Intercom 031621NA 28
Figure 32, DNS Settings
Configure Mobile Client Connection
Configure Hik-Connect server parameters before viewing videos via mobile client.
Before You Start
Make sure the indoor station connects to the network.
Steps
1. Click Hik-Connect to enter configuration page.
2. Enable Enable Hik-Connect Access.
3. Enable Custom and edit Service Address.
4. Enter the Verification Code.
5. Click Save.
Device Network Configure
On the devices network configuration page, you can configure the network parameters of master
stations, SIP servers, and management centers of the same LAN. The devices can be linked to the door
station and realize the linkage between these devices.
Steps
1. Click Device Network Config to enter the settings page.
Figure 33, Device Network Configure
2. Select the Device Type according to your need.
3. Set the Community No., Building No., Unit No., Floor No., and Room No.

HIKVISION DS-KH9510-WTE1 Specifications

General

Product type	Master station
Product color	White
Display resolution	1024 x 600 pixels
Brand compatibility	Hikvision
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Depth	166 mm
Width	254 mm
Height	26.65 mm