2.3 Speed Dome Installation
The speed dome supports five mounting types: tripod mounting, vehicle roof mounting,
wall mounting, pendant mounting, and vertical pole mounting. You can select
appropriate mounting type according to the actual condition.
Before you start:
Please power off the speed dome before performing any mounting or wiring.
Make sure the installation location is large enough to contain the speed dome and
other installation components.
Make sure the installation position such as the vehicle roof can bear the weight
which is 8 times heavier than that of the speed dome and other installation
components.
2.3.1 Tripod Mounting
When using the speed dome in a fixed position, you can select tripod mounting.
1. Install the tripod on the flat floor.
Figure 2-13 Install Tripod
Note:
Refer to the tripod user manual for the detailed installation of tripod.
2. Fix the junction box on the tripod.
3. Adsorb the four magnets on the base of the speed dome to the junction box.
To Next Page
Loading...
Need help?
General
