4 Activation
You are required to activate the speed dome first by setting a strong password for it
before you can use it.
Activation via web browser, SADP, and client software are supported. In the following
sections, activation via web browser and SADP will be taken as examples. You may refer
to the user manual for the details of activation via client software.
4.1 Activate via Web Browser
Steps:
1. Power on the speed dome, and connect the speed dome to the network.
2. Open the web browser.
3. Input the IP address in the address bar, and press Enter to enter the activation
interface.
Note:
The default IP address of the speed dome is 192.0.0.64.
Figure 4-1 Activation Interface (Web)
4. Create a password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
5. Confirm the password.
6. Click OK to activate the speed dome and enter the live view interface.
To Next Page
Loading...
Need help?
General
